How Activate Windows 8.1 Pro and Windows 8.1 Enterprise - Offline Activator

How Activate Windows 8.1 Pro and Windows 8.1 Enterprise | Offline Activator

This is the procedure on How to Activate your Windows 8.1 Pro / Enterprise!

TAGS: Free Windows 8.1 Activation, Free Windows 8.1 Downloads


OPTION #1:
STEPS:

• REMOVE installation key first follow this Screen Shots Download Win Act
• [ Download Link ] then Run

• Download activator [ Download Link ]
• Right click A9600E "from enterprise or pro" and select run as administrator follow my screen shot below

•  Check your Computer properties looks like this

•  Download and Unzip My_WCP_watermark_editor.zip [ Download Link ]

• follow Screen Shot below and wait to complete the Processed

 Done!

OPTION #2: 

• Download W8.1 Pro [ Download Link ]
• REMOVE installation key first follow this Screen Shots Download WinAct 
• [ Download Link ] then Run

• Run CMD as Administrator
  type SLUI 3 enter this serial key
  NTTX3-RV7VB-T7X7F-WQYYY-9Y92F
  wait for system to accept the key and prompt that it's done.

• Run CMD as Administrator
  type SLUI 4, select UNITED KINGDOM, next you will see your installation I.D this must be appeared in the installation I.D (if NOT DO NOT CONTINUE This process and proceed to the Activation 1)
  installation i.d 5798411 5450483 2943601 1243920 6545380 2885066 9612621 9251254 1949360 

• Click ENTER CONFIRMATION I.D and enter to fields this confirmation

        Confirmation Keys:

         A 054343
          B 968884
          C 830996
          D 505981
          E 885621
          F 883754
          G 975792
          H 926443

 

• Click ACTIVATE WINDOWS and wait for the process to finish and prompt saying "Thanks, you're all done." then click Close and restart. 

• If you still have watermark, Just use watermark remover [ Download here ] 

• Done! 

Read More

How to Snipe 5 mbps MAC and Motorola device MAC for Smart Telecom

How to Snipe 5 Mbps MAC and Motorola MAC for Smart

This is a procedure on How to Snipe 5 Mbps MAC and Motorola MAC for Smart user.

1.Install angry ip scanner. (Download Link)

2. Open ip scanner

• Go to tools Preference 
• Ports put port 12345,8080 
• Unchecked for each host in bottom
• Display host with open ports only
• clickOK.

3. Put in ip range example 10.0.190.1 to 10.1.255.254

4. Start Sniping

5. If there is an open connection detected, right click, open in telnet.
 Open admin:  log in user: admin pass: admin

6. Then type ipconfig, find for eth0 hwaddress. (that's a 5mbps mac)

7. Open in browser http:// ip12345 If you want to enter to uh235

8. Port 8080 Motorola. httpsmotorola ip8080, Go to about tab you will find it there. 
For Motorola device the default password is motorola and to Nokia and Siemens the password is nsn.
9. Done! 

How to Snipe 5 Mbps MAC and Motorola MAC for Smart

 
TAGS: Smart 5Mbps Mac address sniper, smart Mac sniping tool, smart 5mbps sniper, free 5mbps smart mac 2014, smart motorola 5mbps mac free, motorola 5mbps mac free, 5mbps mac for smart

Read More

How to Setup Smartbro Modem Router I Easy tutorials

Hoe to Setup Smartbro Modem Router

This is a tutorials in  how to setup your Smart Bro modem to a wired or wireless router.

Below are the thing you need in able to complete the tutorials course

1. Modem (Smart Broadband)
2. Router (wired or wireless router)
3. Network adapters
4. Browser(Firefox / Chrome)

Follow Steps:

• Connect Smart Bro canopy antenna to your Computer
• Get the IP Address, MAC address, Subnet Mask, Default Gateway and DNS Server information.
• To Do this: go to “RUN” command and  type “ipconfig /all” then hit enter.
• Plug in your router, then turn it on.
• Connect your DLink Router to SmartBro modem using Ethernet cable.
• Connect the Ethernet RJ45 Network Cable to your PC from one of the LAN ports of your router.
• Open the router’s administration tool: Type “http://192.168.1.1″ or “http://192.168.0.1″to your browser.
• The router’s home page will ask you for a username and password. Both are provided in the router’s documentation. Or Try this User: admin Password: 1234 or Username: (leave it blank) Password: admin. 
• Now go to WAN Setup then choose Static IP. Fill up all the information in the page (the info you gathered in step 2) then hit Apply; Now your router will reboot automatically.
• Then open your web browser and visit any website just like this http://tuts-me-how.blogspot.com/ {to check if your smart bro connection is working}
• Lastly, you configure an additional network security features and change the default administrator password.     

Reminders:

 

Be sure all router's connection are tightly  connected.
Also you can use CLONE MAC (If you want not to be directed in your Portal) 

TAGS: Smartbro Modem Router Setup, How to Setup smarbro modem router 

Read More

How to UpgradeHuawei Wimax BM622i Firmware

How to Upgrade Huawei Wimax BM622i Firmware

 

This tutorials show you on how to upgrade your 2010 bm622i Package Date to 2011.
  Download this tool : Globe WiMax Upgrade Tool  

Example:

From B025 to B030

Wait to complete then UNPLUG your MODEM then PLUG it again.

Click Modem Reboot

Next: Check Web Interface

Note: (After the Upgrade is finish User is no longer working)

Done! Now you can  log-in to your Upgraded Modem using this username and password:

User:             User

Password:    0SlO051O

Thank You for reading the article.

TAGS: Huawei Wimax BM622i Firmware Upgrade , BM622i setup

Read More